Module 3.2: Cyberchallenge #2: router setup
Migration
router-gateway challenge
setup your router with an external address in
progressthe form 10.14.90.x and write this on the board
setup a LAN network with internal network scope 192.168.6.1 with 254 hosts
connect one of the pi400 to your LAN using an ethernet cable
find the IP address for
the pi400 inside your network
use the DHCP setting to give it a fixed address
the pi has a web server built in on port 80, setup inbound port mapping (forwarding)
challenge your neighbors out in the cruel internet to view your web page
enable port forwarding for ssh and challenge them to get into your pi 400 and create a folder with their name on it and a hidden message inside that folder (optional)
close off ssh access when you are done and create a hidden wifi network
disconnect the pi 400 from the ethernet and connect to your access point using wifi on the pi 400
use access controls to block the pi then unblock it using MAC address filteringdo the same for your laptop, blocking by MAC address
use content controls to block a named site for the pi 400 and test
use timed access to enable then disable the pi 400 on the wifi network
challenge your neighbors to find your wifi network based on name using our lab macbooks (the new thin ones) or your laptop (apple silicon)
enable a guest wifi network and see if anyone can join that
after they record the MAC address of your access point, challenge them to find your hidden network using the same MAC address
on the lab macbooks, use wifi scanning tools to scan the elab wifi networks
go on a wifi hunt around the campus looking for wifi networksmap out coverage areas using the lab macbooks
search for access points and identify the vendor from the MAC address (DO NOT BREAK IN)
record the MAC address for car wifi units, and use OUI lookup to determine the vendor
Migrated from Apple WikiServer Wiki. Original page K3h1o6Q.ID: K3h1o6Q
