VOM meter basics
Migration
VOM/DVM
Fluke 114:

Fluke 101:

- V~ means AC voltage
- V-- means DC voltage (red +, black -)
- mV means millivolts (caution with this one)
- Ω means ohms
- ||| means sound for continuity (114)
- -||- means capacitor check (101)
- Hz means frequency (101)
Part one: record your results and email along with diagrams and photos of your work
Arduino parts part: Each kit should have these. Count them out into a new bin for your next kit:

Unmigrated media: arduino parts.pdf (application/pdf, 102.9 KB)
test the resistance of an LED forwards and backwards. Why? confirm the resistance of both resistors Don’t test the diode it will burn out measure the resistance of the potentiometer (volume control) while moving the knob. It has three wires, measure across and from the middle to the ends measure the resistance of the photoresistor in dark and light-explain look up what a piezo element is, and what it does, then find a way to test it skip the temp sensor and the transistor, you could burn them out with the meters check the motor for both resistance and voltage (only when you spin it) diagnose which terminals on the pushbutton switch do whatleave the servo, relay and integrated circuit for later
Full Arduino manual next:
Unmigrated media: arduino.pdf (application/pdf, 6.4 MB)
Migrated from Apple WikiServer Wiki. Original page e2B9d9w.ID: e2B9d9w